How to Clean Car Floor Carpet – 6 Easy Way

Clean your car floor carpet and say goodbye to muddy shoes and spills! You can take a few simple steps to get your car floor carpet sparkly clean and free of dirt, stains, and odours. Keep reading to learn how to clean car floor carpet.

What to Use to Clean Car Carpet

Here are some of the typical cleaning solutions for car carpets:

1. Steam Cleaning

Steam cleaning is an effective and eco-friendly way to eliminate dirt and grime from your carpets. It uses high-pressure steam to penetrate deep down into the pile of fabric, releasing dirt and bacteria from the surface.

Make sure to follow the instructions provided with your steam cleaner and use only approved cleaning solutions.

2. Shampooing

A carpet shampoo specifically designed for cars is a great way to get rid of stubborn dirt. Mix your shampoo with warm water and use a scrubbing brush to work the shampoo into the carpet. Then, use a damp cloth to blot away the suds and rinse the carpets with clean water.

3. Spot Cleaning

For small stains or spot clean-ups, you’ll need to ensure the cleaner you use is safe for the fabric of your carpets. You can usually find upholstery or fabric-safe stain removers at your local store. Do a spot test first on an inconspicuous area before attempting a full cleaning.

4. Baking Soda

Baking soda is a great, all-natural alternative for car carpet cleaning. Start by sprinkling a thin layer of baking soda over the affected area, and then use a brush to work it into the fabric. Let the baking soda sit for 15 minutes, then vacuum the area.

Finally, if you ever need to clean your carpets deep, consider taking them to a professional auto detailing shop. They’ll be able to give your car the best possible cleaning with the right tools, products and expertise.

How to Clean Car Floor Carpet

How to Clean Car Floor Carpet

One of the components that can be easily neglected is the car floor carpet, which tends to accumulate dirt, dust, crumbs and other debris over time.
Here’s how to clean car floor carpet, so it stays in great shape.

1. Assess the Carpet

Before you begin, look at your car’s floor carpet condition. If it’s heavily soiled, you may need to use a more powerful cleaning solution to get it clean. The type and amount of dirt, as well as the type of material from which the carpet is made, will determine the best solution for the job.

2. Vacuum

Start vacuuming to remove dirt and debris from your car’s floor carpet. This will also help to keep dust and allergens from settling in. Focus on any deep grooves, seams, or crevices in the rug, as these may easily contain dirt and grime that a vacuum cleaner may not reach.

3. Pre-Treat Problem Areas

If you have any stains, spots or problem areas on your car’s carpets, you will want to pre-treat them to hopefully remove them or at least make it easier to clean them.

Identify the type of stain and use the appropriate solution to treat it. You may need to repeat the process multiple times for tough or stubborn stains until the stain is gone.

4. Clean With the Appropriate Solution

Once all stains have been pre-treated, and the floor carpet has been vacuumed, it’s time to use the appropriate cleaning solution to clean the entire area. You may need a mild solution if the rug is light-coloured or delicate.

You’ll likely need to use a stronger solution to remove tougher stains. Be sure to read and follow any instructions with the cleaning solution and test the solution on a small area of the carpet before proceeding.

5. Scrub and Rinse

Once you’ve applied the cleaning solution, you will need to scrub the area with a brush and then rinse it with a damp cloth. Ensure to avoid saturating the carpet with water since this can cause damage to the carpet material.

6. Let it Dry

Once all the cleaning is done, and your car’s floor carpet has been completely rinsed with a damp cloth, leave the car open and in a ventilated area so the carpet can dry completely. This is often the most time-consuming part of the process.

Following these steps, you can help ensure your car’s floor carpets stay clean and in great condition. Regular deep cleaning of your car’s floor carpets will keep your vehicle looking and smelling its best.

How to Clean Car carpet with Baking Soda

Baking soda is one of the least abrasive cleaners and is a mild alkali. As it is safe to use on most surfaces, it is an ideal product for cleaning your car’s interior. Plus, it is affordable and easily accessible; you can find it at any local grocery or home goods store.

Here are the steps to follow to easily clean your car carpet and upholstery using baking soda:

Step 1: Vacuum the Carpet

The first step is to thoroughly vacuum the carpet with an upright or handheld vacuum cleaner to remove any dirt or debris.

Step 2: Sprinkle Baking Soda

Next, sprinkle baking soda liberally over the carpet and make sure it covers the entire area.

Step 3: Allow the Baking Soda to Sit

Allow the baking soda to sit on the carpet for 30 minutes. This allows it to absorb any odors and loosen dirt from the fibers of the carpet.

Step 4: Vacuum again

Re-vacuum the carpets to remove the baking soda and any dirt that was absorbed by it.

Step 5: Repeat as Needed

When necessary, repeat the process until you are satisfied with the results.

How to Clean Car Carpet By Hand

Whether you have stained carpets, discoloured carpets, or carpets that require a refresher, here’s an all-inclusive guide to the best steps for cleaning car carpets by hand.

Step One

Before applying any cleaning solutions, it’s essential to remove all dirt and debris from the carpets. Deep vacuuming with a heavy-duty vacuum cleaner is recommended to ensure you go over the entire surface of the rug.

Step Two

Use a scrub brush to loosen up the dirt. If you haven’t deep-cleaned your carpets in a while, then a stiff brush is your best bet to loosen any dirt, debris, or mud that may be present. Use a brush in circular motions to loosen the trash, then vacuum once again.

Step Three

Select a cleaning solution. Depending on the level of cleaning your carpets need and the fabric composition of your carpets, your best bet may be a spot cleaner or all-purpose cleaner.

Make sure to follow any instructions that come with the product as to what the correct dilution ratio should be.

Step Four

Use a scrub brush to apply the cleaning solution. Use the same kind of motion as you did in step two, working your way around the carpet to ensure the cleaning solution reaches all carpet areas. Make sure to be gentle and avoid scrubbing too hard, as this could damage the carpet’s fibres.

Step Five

Use a wet/dry vacuum to suck up the dirty water. After all the dirt, debris, and grime have been loosened up, use a damp/dry vacuum to suck up the dirty water, making sure to leave the carpet wet.

Step Six

Let the carpet dry. Allow the mats to air dry completely before using them again or touching them.

FAQs About How to Clean Car Floor Carpet

  • Q: What supplies do I need to clean my car carpet by hand?

A: To clean your car carpet by hand, you will need household kitchen utensils, such as a vacuum cleaner, carpet brush or soft cloth, towels, a bucket or tub, carpet or upholstery cleaner, and household cleaning products.

  • Q: How should I start cleaning my car carpet?

A: Start by vacuuming the carpet and removing any debris and dirt that has accumulated. Then use a carpet brush to get deeper into the fibers and a carpet cleaning solution to help break down dirt and stains.

  • Q: What should I do if there are stubborn stains on my car carpet?

A: Use a heavy-duty cleaning product to help remove the stain, paying particular attention to the directions on the packaging. For food and drink spills, blot the stain with a paper towel or cloth first to absorb the liquid, then spray a carpet cleaner to help remove the residue.

  • Q: Is there anything else I need to do after cleaning my car carpet?

A: It’s important to dry the carpet thoroughly to protect it. Use towels or a wet vac to suck up the remaining moisture. You can also use a fan to help speed up the drying process.


So, how to clean the car floor carpet? To properly clean your car floor carpet, it is important to use the correct products and methods to get the job done safely and effectively. You can vacuum your car floor carpet, shampoo or spot clean with a cleaning solution, or extract the dirt with a steam cleaner.

Vacuuming or shampooing can be done seasonally, while steam extraction should be conducted more frequently. Following the steps, you can deep clean and maintain your car floor carpet to keep it looking and feeling new.

Leave a Reply

Your email address will not be published. Required fields are marked *